Disclaimer: Please note that the items featured in the image (schematic diagram) are not sold as a bundled set. To facilitate your search, kindly refer to the schematic object key provided below in order to locate a specific item within the image.
EVINRUDE-JOHNSON 5040182 Water Pump Guide Plate
Schematic Object Key : 32
Product Description: Water Pump Guide Plate
Category: EVINRUDE / AA Models / 4 PORTABLE / B4RL4AAA / 17-1_GEARCASE
Disclaimer: Each item listed in the table below is available for individual purchase and is not sold as part of a package or set.
Parts List:
| Key | Part No. | Product Name | Additional_info |
|---|---|---|---|
| – | 5040231 | Gearcase, complete15 in. models | |
| – | 5040232 | Gearcase, complete20 in. models | |
| 1 | 5040226 | Gearcase housing15 in. models | |
| 2 | 5040145 | Roller bearing 14 20 12 | |
| 3 | 5040029 | Plug | |
| 4 | 5040030 | Gasket 8.1 15 1 | |
| 5 | 5041015 | Anode | |
| 6 | 5041524 | Bolt | |
| 7 | 5041703 | Ball bearing 6004 | |
| 8 | 5040233 | Propeller shaft housing assembly | |
| 9 | 5040227 | Propeller shaft housing | |
| 10 | 5040143 | Oil seal 15 28 10 | |
| 11 | 5040061 | O ring 3.2 47 | |
| 12 | 5041702 | Ball bearing 6002 | |
| 13 | 5040155 | Bevel gear ass’ya | |
| 14 | 5040158 | Bevel gear b | |
| 15 | 5040159 | Bevel gear assembly c | |
| 16 | 5040160 | Washer 15.2 19 1.9 | |
| 17 | 5040156 | Shim 21 28 0.1 | |
| 17 | 5040156 | Shim 21 28 0.1 | This part replaces 5040157. |
| 18 | 5040166 | Propeller shaft | |
| 19 | 5040007 | Clutch | |
| 20 | 5040008 | Pin 3.5 28 | |
| 21 | 5040236 | Spring clutch | |
| 22 | 5040167 | Spring retainer clutch | |
| 23 | 5040168 | Push rod clutch | |
| 24 | 5040144 | Water strainer | |
| 25 | 5041638 | Screw | |
| 26 | 5040184 | Water pipelower | |
| 27 | 5040185 | Seal rubber water pipe lower | |
| 28 | 5040180 | Water pump impeller | |
| 29 | 5040181 | Key pump impeller | |
| 30 | 5040176 | Pump caseupper | |
| 31 | 5040174 | Pump case liner | |
| 32 | 5040182 | Water pump guide plate | |
| 33 | 5040178 | Pump case gasket | |
| 34 | 5040183 | Guide plate gasket | |
| 35 | 5041584 | Bolt | |
| 36 | 5041661 | Washer | |
| 37 | 5040177 | Pump caselower | |
| 38 | 5040147 | Oil seal 10 24 8 | |
| 39 | 5040161 | Shim 28 34.8 0.1 | |
| 39 | 5040161 | Shim 28 34.8 0.1 | This part replaces 5040162. |
| 40 | 5040179 | Pump case gasketlower | |
| 41 | 5041534 | Bolt | |
| 42 | 5040175 | Water pipe seallower | |
| 43 | 5040169 | Drive shaft15 in. models | |
| 43 | 5040170 | Drive shaft20 in. models | |
| 43 | 5040171 | Drive shaft25 in. models | |
| 44 | 5041705 | Ball bearing 6300 | |
| 45 | 5040191 | Clutch cam | |
| 46 | 5041691 | Spring pin 3 10 | |
| 47 | 5040192 | Cam rod15 in. models | |
| 47 | 5040193 | Cam rod20 in. models | |
| 47 | 5040194 | Cam rod25 in. models | |
| 48 | 5040196 | Cam rod bushing | |
| 49 | 5040195 | O ring a 2.5 4.9 | |
| 50 | 5040036 | O ring 2.4 15.4 | |
| 51 | 5040197 | Stopper com rod bushing | |
| 52 | Not used on BRP engine models | ||
| 53 | 5041584 | Bolt | |
| 54 | 5041668 | Washer | |
| 55 | 5041587 | Bolt | |
| 56 | 5041669 | Washer | |
| 57 | 5041559 | Bolt | |
| 58 | 0766540 | Propelleraluminum 3 blade, 7.8 in. diameter x 7 in pitch | |
| 58 | 0766541 | Propelleraluminum 3 blade, 7.8 in. diameter x 8 in pitch | |
| 58 | 0766542 | Propelleraluminum 3 blade, 7.8 in. diameter x 9 in pitch | |
| 59 | 5041052 | Propeller hardware kit | |
| 60 | 5040164 | Propeller nut | |
| 61 | 5041695 | Split pin 3 18 | |
| 62 | 5040165 | Washer 10.5 28 2 | |
| 63 | 5040497 | Bushing, thrust | |
| 64 | 5040186 | Water pipe15 in. models | |
| 64 | 5040187 | Water pipe20 in. models | |
| 64 | 5040188 | Water pipe25 in. models | |
| 65 | 5040189 | Grommet water pipe | |
| 66 | 5040224 | Water pump repair kit | |
| 67 | 5040190 | Water pump kitchrome plated | |
| 68 | 5040223 | Lower unit gasket set |


![RAM Mount Triple 1" Ball Base [RAM-B-289U]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-triple-1-ball-base-ram-b-289u.webp)
![RAM Mount Yoke Clamp Base w/1" Ball & 1/4-20" Tap [RAM-B-121BAU]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-yoke-clamp-base-w-1-ball-1-4-20-tap-ram-b-121bau.webp)
![RAM Mount Motorcycle Brake/Clutch Reservoir Base [RAM-B-309-1U]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-motorcycle-brake-clutch-reservoir-base-ram-b-309-1u.webp)
![RAM Mount 1" Ball Connected to 3/8"-16 Threaded Post [RAM-B-236U]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-1-ball-connected-to-3-8-16-threaded-post-ram-b-236u.webp)
![RAM Mount M6 Threaded Female Hole w/1" Ball [RAM-B-273-M6U]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-m6-threaded-female-hole-w-1-ball-ram-b-273-m6u.webp)
![RAM Mount 2" x 3" Rectangle Base w/1" Ball [RAM-B-202U-23]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-2-x-3-rectangle-base-w-1-ball-ram-b-202u-23.webp)
![RAM Mount Double Ball w/2.5" Round Base [RAM-B-217U]](https://www.latchfittingstore.com/wp-content/uploads/2026/10/ram-mount-double-ball-w-2-5-round-base-ram-b-217u.webp)